The Story
99-06 Toyota Tundra/Sequoia 3" Front Suspension Leveling Kit
Level your front end with a 3-inch lift kit engineered for Tundra and Sequoia trucks. This suspension system is built to match factory geometry and minimize binding, so you get a clean stance without compromising ride quality. Designed for DIY installation with basic hand tools and a jack.
Key Features
- 3-inch front lift - Levels the front-to-rear rake without overloading the suspension geometry
- Bolt-on design - Mounts at factory suspension attachment points, no welding or drilling required
- Minimal binding - Geometry engineered to reduce component stress during articulation and daily driving
Specs
- Lift height: 3 inches
- Configuration: Front suspension kit
- Condition: New
Whats Included
- Front leveling kit assembly
Frequently Asked Questions
Will I need to re-align my truck after installation?
Yes. After any suspension change, alignment is necessary to set caster, camber, and toe back to spec. Plan for a shop visit after install—this keeps tire wear even and steering feel locked in.
Do I need extended brake lines or bump stops?
That depends on your truck's condition and how you plan to use it. Test-fit the kit first, then assess how much extra suspension travel you have. If you're running stock shocks and springs, you may want to add bump stops to prevent bottoming—contact a suspension shop for specifics on your setup.
Can I install this myself with basic tools?
This kit bolts to factory points, so you won't need welding equipment. You'll need a jack, jack stands, basic wrenches, and a torque wrench. If you're comfortable removing and reinstalling suspension components, it's a weekend job. If not, a shop install takes 2–3 hours.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
99-06 Toyota Tundra/Sequoia 3" Front Suspension Leveling Kit
Level your front end with a 3-inch lift kit engineered for Tundra and Sequoia trucks. This suspension system is built to match factory geometry and minimize binding, so you get a clean stance without compromising ride quality. Designed for DIY installation with basic hand tools and a jack.
Key Features
- 3-inch front lift - Levels the front-to-rear rake without overloading the suspension geometry
- Bolt-on design - Mounts at factory suspension attachment points, no welding or drilling required
- Minimal binding - Geometry engineered to reduce component stress during articulation and daily driving
Specs
- Lift height: 3 inches
- Configuration: Front suspension kit
- Condition: New
Whats Included
- Front leveling kit assembly
Frequently Asked Questions
Will I need to re-align my truck after installation?
Yes. After any suspension change, alignment is necessary to set caster, camber, and toe back to spec. Plan for a shop visit after install—this keeps tire wear even and steering feel locked in.
Do I need extended brake lines or bump stops?
That depends on your truck's condition and how you plan to use it. Test-fit the kit first, then assess how much extra suspension travel you have. If you're running stock shocks and springs, you may want to add bump stops to prevent bottoming—contact a suspension shop for specifics on your setup.
Can I install this myself with basic tools?
This kit bolts to factory points, so you won't need welding equipment. You'll need a jack, jack stands, basic wrenches, and a torque wrench. If you're comfortable removing and reinstalling suspension components, it's a weekend job. If not, a shop install takes 2–3 hours.
