The Story
2.75" to 3.00" 90 Degree Silicone Reducer Hose — 3-Ply Black/Red
Angled silicone transition hose steps down from 2.75" to 3.00" with a 90-degree bend for tight plumbing runs. Three-ply construction handles boost pressure and coolant flow without kinking. Black exterior with red inner lining for easy visual identification in tight engine bays.
Key Features
- Mandrel-bent 90-degree geometry - Maintains interior diameter through the bend; no crushing or flow restriction.
- Dual-color design - Black outer layer resists UV; red inner core simplifies leak diagnosis and routing visibility.
- 3-ply reinforcement - Handles sustained boost and coolant pressure without ballooning or pinching.
Specs
- Material: Silicone
- Configuration: 90-degree elbow reducer
- Size: 2.75" inlet to 3.00" outlet
- Construction: 3-ply reinforced
- Condition: New
- Quantity: 1 piece
Whats Included
- 1x Silicone reducer hose
Frequently Asked Questions
Do I need hose clamps to install this?
Yes. Clamps are not included with this hose. You'll need appropriately sized clamps for both the 2.75" and 3.00" ends — worm-gear or T-bolt clamps work well depending on your plumbing setup.
Can this hose handle boost pressure?
The 3-ply construction is rated for pressurized systems. Exact pressure rating depends on clamp torque and installation method — verify your boost level against hose specifications before final assembly.
Will the red inner lining affect coolant or other fluids?
The red lining is dye in the silicone, not a separate coating. It's compatible with standard coolants, water, and boost piping applications — rinse before first use if flowing coolant.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
2.75" to 3.00" 90 Degree Silicone Reducer Hose — 3-Ply Black/Red
Angled silicone transition hose steps down from 2.75" to 3.00" with a 90-degree bend for tight plumbing runs. Three-ply construction handles boost pressure and coolant flow without kinking. Black exterior with red inner lining for easy visual identification in tight engine bays.
Key Features
- Mandrel-bent 90-degree geometry - Maintains interior diameter through the bend; no crushing or flow restriction.
- Dual-color design - Black outer layer resists UV; red inner core simplifies leak diagnosis and routing visibility.
- 3-ply reinforcement - Handles sustained boost and coolant pressure without ballooning or pinching.
Specs
- Material: Silicone
- Configuration: 90-degree elbow reducer
- Size: 2.75" inlet to 3.00" outlet
- Construction: 3-ply reinforced
- Condition: New
- Quantity: 1 piece
Whats Included
- 1x Silicone reducer hose
Frequently Asked Questions
Do I need hose clamps to install this?
Yes. Clamps are not included with this hose. You'll need appropriately sized clamps for both the 2.75" and 3.00" ends — worm-gear or T-bolt clamps work well depending on your plumbing setup.
Can this hose handle boost pressure?
The 3-ply construction is rated for pressurized systems. Exact pressure rating depends on clamp torque and installation method — verify your boost level against hose specifications before final assembly.
Will the red inner lining affect coolant or other fluids?
The red lining is dye in the silicone, not a separate coating. It's compatible with standard coolants, water, and boost piping applications — rinse before first use if flowing coolant.
